Can-Am Maverick X3 Dual Battery Kit
$399.00 Original price was: $399.00.$359.00Current price is: $359.00.
Description
Overview
When you outfit your high-performance side-by-side with heavy-draw electrical accessories like high-output audio systems, LED light bars, winches, and communication radios, your stock electrical configuration faces severe strain. The Can-Am Maverick X3 Dual Battery Kit is an essential performance power upgrade engineered specifically to eliminate the risk of unexpected trail strandings caused by a depleted starter battery. As a critical component governing your machine’s power distribution, this comprehensive kit integrates a secondary auxiliary battery and an intelligent smart-isolator relay directly into your vehicle’s architecture.
This specialized dual battery system is fundamentally important because it cleanly isolates your auxiliary electronics from your primary cranking power source. When your ignition is turned off, the intelligent isolator automatically disconnects the secondary battery, allowing you to run accessories, winches, or stereos without draining the starter battery. Once the engine fires up, the charging system seamlessly replenishes both power cells. It heavily protects and supports vital subsystems including ATV Electrical Parts, ATV Engine Parts, and overall vehicle reliability across grueling off-road terrains in North America, Canada, the United States, and Australia.
Key Features
-
Engineered specifically for all model years of the Can-Am Maverick X3 and Maverick X3 MAX
-
Includes heavy-duty precision-cut steel or aluminum mounting brackets designed to fit securely in the factory location behind the passenger seat
-
Intelligent voltage-sensing battery isolator relay (available in 80A to 100A configurations)
-
Automatically separates starting and accessory circuits during engine-off phases
-
Recharges the secondary auxiliary battery automatically while the engine is running
-
Premium high-current copper power cables (8 AWG to 6 AWG options) with chemical- and heat-resistant insulation
-
Sealed, maintenance-free AGM (Absorbent Glass Mat) dry cell auxiliary battery options providing high cold-cranking amps (CCA)
-
Comprehensive hardware pack featuring stainless steel bolts, nylon lock nuts, and secure terminal distribution blocks
-
Integrated fuse holder protection (such as 100A MIDI fuses) to safeguard wiring harnesses against short circuits
-
Vibration- and shock-resistant architecture built to withstand extreme desert racing and rugged trail pounding
-
Plug-and-play or direct-fit integration utilizing factory mounting points with minimal modification required
-
Weather-resistant components equipped with protective boots and waterproof relay modules to resist moisture, mud, and debris
Benefits
-
Performance: Delivers a reliable, uninterrupted electrical current to heavy-draw accessories, ensuring your light bars shine at maximum brightness and your audio amplifiers perform distortion-free.
-
Reliability: Eliminates the anxiety of finding a dead battery after running accessories while parked, ensuring your machine fires up reliably every single time.
-
Safety: Protects critical engine management systems and electronic fuel injection components from voltage drops, preventing unexpected electrical glitches out on remote trails.
-
Durability: Utilizes high-grade, marine-grade copper wiring, robust steel mounting brackets, and shock-fortified AGM cells that resist severe off-road vibration.
-
Ride Quality: Works silently behind the scenes to power onboard electronics without interfering with your ATV Suspension Parts or ATV Steering Parts, keeping your machine balanced and tightly packaged.
-
Longevity: Distributes electrical loads evenly across two separate cells, preventing premature thermal degradation and extending the active lifespan of both your primary and secondary batteries.
Product Specifications
Vehicle Compatibility
The Can-Am Maverick X3 Dual Battery Kit is precision-engineered to match the exact spatial and electrical constraints of modern high-performance side-by-sides.
-
Compatible Manufacturers: Can-Am (BRP)
-
Compatible Models: Maverick X3, Maverick X3 MAX, Maverick X3 DS, Maverick X3 RS, Maverick X3 X MR, Maverick X3 X RC
-
Compatible Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
-
Common Applications: Extreme trail riding, dune bashing, night riding with high-output LED configurations, competitive rock crawling, and long-range backcountry expeditions across North America, the USA, Canada, and Europe.
Installation Guide
-
Tools Required: Metric socket set, ratchet, wire strippers/crimpers, hex key set, digital multimeter, terminal wrench, and standard hand tools.
-
Estimated Installation Time: 1.5 to 2.5 hours.
-
Difficulty: Intermediate (Basic understanding of 12V automotive electrical systems required).
-
Helpful Installation Tips:
-
Always disconnect the primary negative battery terminal before beginning any wiring work to prevent accidental arcing.
-
Mount the secondary battery bracket securely behind the passenger seat in the designated factory recess, ensuring all fasteners are tightened with nylon lock nuts.
-
Route power cables carefully away from hot exhaust headers, moving drive train components, and sharp frame edges, securing them with zip ties.
-
Signs This Part Needs Replacement
-
Failure of the auxiliary battery to hold a charge or dropping voltage rapidly under light accessory loads.
-
Corroded, frayed, or heat-damaged power cables that fail to pass current cleanly through the isolator.
-
An isolator relay that clicks continuously or fails to switch circuits when the engine transitions from off to running.
-
Physical cracking or bulging of the secondary AGM battery case due to overcharging or extreme thermal cycles.
-
Intermittent power loss to accessories while the vehicle engine is idling or running at low RPMs.
Frequently Asked Questions
Will this dual battery kit drain my primary starting battery?
No. The intelligent battery isolator relay automatically separates the primary and secondary batteries when the ignition is turned off, ensuring your starting battery remains fully protected.
Do I need to buy a second battery separately or does the kit include it?
Depending on the specific kit option selected, some packages include a matching AGM dry-cell battery, while others provide just the mounting tray, isolator, and wiring harness. Check product inclusions carefully.
Where is the secondary battery mounted on the Maverick X3?
The auxiliary battery mounts neatly out of the way in the factory-intended storage space located directly behind the passenger seat.
Can I run a winch off the secondary battery?
Yes, connecting high-draw accessories like winches and heavy light bars to the secondary battery prevents voltage spikes and dips from resetting your dash instruments or stalling your EFI system.
Will this kit work with factory and aftermarket charging systems?
Yes, the voltage-sensing relay is fully compatible with the stock stator and charging output of all Can-Am Maverick X3 models.
Do I need special tools to install this kit?
Basic hand tools such as sockets, wrenches, and wire crimpers are sufficient. The kit includes pre-cut wiring and custom brackets to minimize custom fabrication.
How do the batteries charge when the engine is running?
Once the engine starts and the alternator voltage rises above a specific threshold, the isolator engages and links both batteries so they charge simultaneously.
How can I maintain my AGM auxiliary battery during long storage periods?
We recommend connecting an automatic 12V smart battery maintainer to keep your batteries fully conditioned during the off-season.
Why Buy From ATVPartsOnline.co
When you source your upgrades from ATVPartsOnline.co, you are partnering with dedicated off-road specialists who prioritize quality and performance. We offer:
-
Carefully sourced inventory from top-tier global manufacturers
-
Secure checkout processes to protect your personal information
-
Fast order processing to get your machine back on the trail quickly
-
Reliable customer support backed by decades of technical expertise
-
Competitive pricing across all major performance categories
-
Nationwide shipping across the USA and North America
-
International shipping availability to select regions worldwide
Related products
-
Mac Air Two Person Air Pumper complete system with with 2 Wired Bell Qualifier Pumper Helmets | Rugged Radios
$1,064.90Original price was: $1,064.90.$965.00Current price is: $965.00.Add to cart -
Can-Am Maverick X3 Lug Nuts Spline Drive Locking with Key
$34.95Original price was: $34.95.$31.99Current price is: $31.99.Add to cart -
CAN-AM X3 4-Point Harness Quick Release Auto Latch Harness Kit | Rad UTV Parts
$310.97Original price was: $310.97.$289.00Current price is: $289.00.Add to cart -
Polaris RZR Lug Nuts Spline Drive with Locking Key 12×1.5
$34.95Original price was: $34.95.$29.99Current price is: $29.99.Add to cart -
Bell Qualifier Top Air Pumper Prerunner Wired UTV Play Helmet
$334.95Original price was: $334.95.$319.00Current price is: $319.00.Add to cart







Reviews
There are no reviews yet.