APEXX Lower & Middle Radius Bar Can-Am Maverick X3 – 72 Inch

Description

Overview

Conquering brutal, rock-strewn trails and deep ruts in a high-performance side-by-side demands a bulletproof rear suspension setup, and installing the APEXX Lower & Middle Radius Bar Can-Am Maverick X3 – 72 Inch completely elevates your machine’s rear-end stability. What this product is: a heavy-duty replacement and upgrade kit consisting of robust middle and lower radius rods engineered specifically for wide-stance UTV configurations. What it does: it links your rear wheel hubs securely to the frame while featuring strategically designed arches that provide 1.75 inches of extra ground clearance over factory components. Why it is important: factory stock radius rods are notoriously prone to bending or shearing under aggressive off-road torque, leaving your rear wheels out of alignment. Which ATV systems it affects: this upgrade directly integrates with your machine’s ATV Suspension Parts and ATV Drive Train Parts, working closely with your trailing arms, shocks, and CV axles to maintain optimal geometry across demanding trails in the USA, Canada, and North America.

Key Features

• Engineered by industry-leading brand High Lifter as part of the elite APEXX Suspension Line

• Kit includes both dedicated middle and lower arched radius bars

• Strategically arched design adds 1.75 inches of valuable ground clearance over stock rods

• Crafted from extreme-duty 1.5” x .188” DOM steel construction for maximum structural strength

• Equipped with massive, replaceable 5/8” and heavy-duty 3/4” Teflon-lined spherical bearings

• Integrated heim joints allow quick, precise camber and toe adjustability

• Firm polyurethane bushings eliminate excess slop and unwanted lateral movement

• Durable UV-resistant powder-coated finish to fend off rust and trail debris

• Simple bolt-on installation kit designed for straightforward garage setup

• Built to withstand heavy leverage, extreme articulation, and high-speed desert racing conditions

Benefits

Upgrading to these high-clearance radius bars delivers massive performance gains across your entire off-road experience. The arched profile lifts vulnerable pivot points higher away from jagged rocks and deep ruts, drastically cutting down on drag and scraping. Built from thick DOM steel, these rods absorb violent kinetic impacts without flexing, protecting your rear alignment and ensuring predictable handling through high-speed corners. The inclusion of high-durometer polyurethane bushings and spherical bearings tightens up sloppy suspension feedback, vastly improving overall ride quality, steering precision, and long-term durability.

Vehicle Compatibility

This heavy-duty suspension upgrade is custom-tailored for wide-stance side-by-side platforms.

• Compatible Manufacturers: Can-Am

• Compatible Models: Maverick X3 X RS, Maverick X3 MAX X RS, Maverick X3 Turbo RR (72-inch wide models)

• Compatible Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

• Common Applications: Rock crawling, desert racing, aggressive trail riding, and high-speed dune overlanding.

Installation Guide

Replacing your factory radius rods with this heavy-duty kit requires moderate mechanical experience and standard garage tools.

• Tools Required: Metric wrench and socket set, torque wrench, jack and jack stands, pin punches, and thread-locking fluid.

• Estimated Installation Time: 1.5 to 2.5 hours.

• Difficulty: Moderate (suspension alignment adjustments required post-install).

• Helpful Installation Tips: Support the vehicle securely by the frame so the rear suspension hangs freely, relieving tension off the factory radius rods. When installing the new APEXX bars, set your heim joints to match the factory eye-to-eye length initially, then fine-tune your camber and toe alignment once the UTV is resting on flat ground. Always apply fresh grease to service points and torque all hardware to manufacturer specification.

Signs This Part Needs Replacement

Factory radius rods take a severe beating during regular off-road use. You should inspect or upgrade your rear suspension immediately if you notice visible bending or twisting in the stock rods, sloppy or wandering rear-end steering response, clunking noises coming from worn-out spherical bearings or heim joints, or uneven tire wear resulting from a compromised rear wheel alignment.

Frequently Asked Questions

Do these radius bars fit 64-inch Maverick X3 models?

No, this specific APEXX kit is engineered exclusively for 72-inch wide Can-Am Maverick X3 configurations and will not match the geometry of 64-inch models.

Do I need a lift kit to install these arched radius bars?

No lift kit is required. These bars are direct bolt-on replacements that fit into factory mounting locations while providing extra ground clearance natively.

What is the advantage of arched radius bars over straight ones?

Arched bars curve upward to provide an extra 1.75 inches of ground clearance right where the chassis is most likely to drag over rocks, stumps, and deep trail ruts.

Are heim joints and spherical bearings included?

Yes, the kit comes fully equipped with massive, replaceable Teflon-lined spherical bearings and heavy-duty 5/8” heim joints for precise camber and toe tuning.

How do polyurethane bushings improve performance?

Polyurethane bushings are significantly firmer than soft factory rubber, eliminating unwanted slop and lateral play to ensure instant suspension responsiveness.

Can I adjust the length of these radius bars?

Yes, the threaded heim joint design allows you to easily adjust bar length for fine-tuning your rear wheel alignment and camber settings.

Will these bars withstand extreme desert racing?

Constructed from extreme-duty 1.5” x .188” DOM steel, they are heavily overbuilt to handle brutal high-speed impacts that typically bend factory rods.

What maintenance do these radius rods require?

Periodically inspect mounting bolts for correct torque, check heim joints for play, and keep the spherical bearings and bushings clean and lubricated during regular maintenance.

Will this kit affect my CV axle angles?

The geometry is optimized to maintain proper angles, reducing unnecessary wear and tear on your CV joints compared to poorly designed aftermarket lifts.

Where can I find matching front suspension parts for my Maverick X3?

To fully bulletproof your machine, explore our complete inventory of matching high-clearance control arms and other essential ATV Suspension Parts.

Why Buy From ATVPartsOnline.co

When you shop with us, you are choosing a trusted destination for all your off-road enhancement needs. We provide quality replacement parts, secure checkout processing, fast order processing times, and reliable customer support to assist with any questions. Enjoy competitive pricing on our carefully sourced inventory, backed by dependable nationwide shipping across the USA and convenient international shipping availability where applicable.