Description
Gen 3 Portals are Geared for All
SuperATV’s GDP 4″ Portal Gear Lift for the Honda Pioneer 1000 is Geared for All. With 15% gear reductions and cast aluminum housings so you can optimise for the riding you love most.
Perfect for Mud
If you move up to a 30% gear reduction, you’ll be ready to take on bigger, sloppier mud holes. That boost in torque means you can dominate monster bounty holes without getting stuck. The lift gives you room for bigger tyres so you can turn your Pioneer into a killer mud limo. When you’re done with the mud, a 30% gear reduction can get you through trails, roads, and rocks just as easily.
Perfect for Trails
Get 4″ portals and a 15% gear reduction on your Pioneer and take on the trail less traveled. You’ll keep that high speed and turn those bad washouts and hills into nothing more than speedbumps. It’ll make your machine more capable.
Perfect for Work
Get 4″ portals and a 15% gear reduction on your Pioneer. You’ll have clearance to get over the ditches and debris around your property and you’ll have the gear reduction to push through ruts and ditches easily all while towing a trailer full of tools. Plus, you’ll still have enough speed to cruise down the road.
Better Gears
SuperATV’s gears are precision ground and made with 9310 billet steel alloy for high strength and high speed. That means they’re cool and quiet even when you’re hammering down the throttle on the road, and they have strength to withstand every ride.
Stronger Housings by Design
Try as you might, you won’t find housings stronger than what SuperATV use on their GDP portals. Our housings are smarter, stronger, and more reliable by design. You’re getting housings that offer unmatched strength and dependability. They’ve got the experience and the riders on the trail to back it up.
- Our housings are reinforced in all the right places
- They’re built with better oil flow and gearing forces in mind
- There are no gimmicks and no vents because vents do more harm than good—SuperATV know because they tested them
Advanced Gaskets and Seals
The Cast housings use:
- Advanced Thermo-Tork® gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
- A sealed input gear and double-lipped output seal
- 100% sealing coverage throughout so you can forget about oil leaks
Will fit the following models:
- Honda Pioneer 1000 – 2016+
- Honda Pioneer 1000-5 – 2016+
Wheel Requirements:
- 14″ or larger wheel required
- 14″ & 15″ wheels cannot exceed 4-½” backspacing
- 16″ and larger wheels cannot exceed 5″ backspacing
- If using factory 14″ wheels, you must run 1.5″ wheel spacers
- Not compatible with dual beadlock wheels
