2″ Lift Kit For CFMOTO UForce 600 & Segway Fugleman UT10

Description

Overview

The 2 Inch Lift Kit for CFMOTO UForce 600 & Segway Fugleman UT10 is a precision-engineered suspension upgrade designed to maximize the off-road capability, stance, and utility of your side-by-side. Operating within your vehicle’s integrated ATV Suspension Parts ecosystem, this heavy-duty spring spacer kit provides an immediate 2-inch increase in ride height. By raising the chassis relative to the axles, it drastically improves obstacle navigation over rocky trails, deep mud, ruts, and woody terrain across North America, from the rugged trail networks of the United States to the demanding work environments of Canada.

Unmodified utility vehicles frequently suffer from frame-scraping and underbody impacts when subjected to demanding agricultural chores or aggressive trail riding. This premium lift kit addresses that vulnerability by adding crucial ground clearance without overextending factory CV axles or compromising the precision of your factory ATV Steering Parts. By shifting the stance upward, it safeguards structural factory components, prevents body panels from dragging, and establishes the clearance required to safely run aggressive aftermarket tire configurations.

Key Features

• Full 2-Inch Ride Height Increase: Delivers authentic, predictable chassis elevation to confidently clear logs, rocks, and ruts.

• Aircraft-Grade 6061 T6 Aluminum: CNC-milled from premium billet aluminum for extreme structural integrity and light weight.

• Advanced Slit-Design Engineering: Features a strategic layout that slides securely onto stock shock assemblies for an easier installation.

• Up to 28-Inch Tire Compatibility: Creates necessary wheel well room to accommodate up to 28-inch aggressive off-road tire profiles.

• Preserved Turning Radius: Custom engineered to maintain factory steering geometry, handling dynamics, and responsive control.

• Comprehensive Multi-Piece Kit: Includes a full set of four (4) precision front and rear spring spacers for balanced vehicle lift.

• Corrosion-Resistant Surface: Unlacquered, precision-milled aluminum face inherently resists harsh chemicals, mud, road salt, and rust.

• Anti-Sag Spring Stabilization: Enhances spring preload to prevent factory coils from sagging or compressing under heavy cargo loads.

• Drive Train Alignment Safe: Carefully engineered lift parameters ensure factory CV joints operate safely within acceptable angles to protect your ATV Drive Train Parts.

• Complete High-Grade Hardware Pack: Ships with all essential installation hardware and a step-by-step photographic instruction guide.

Benefits

• Optimized Trail Performance: The additional 2 inches of elevation allows your UTV to clear rugged terrain easily, reducing underbody drag and trail hang-ups.

• Enhanced Chassis Longevity: By keeping the frame rails off the ground, this kit acts as a shield against impact damage to sensitive undercarriage floorboards, skid plates, and engine mounts.

• Maintained Ride Quality: Unlike lower-tier lift blocks that alter shock leverage ratios, these precision spacers work with your stock coil springs to maintain predictable dampening properties.

• Safe Over-Ice & Snow Clearances: Elevating the machine helps utility owners clear deep snowdrifts and frozen ruts when operating heavy snowplows or winter utility attachments.

• Heavy Cargo Load Management: Bolsters structural resistance against chassis bottoming out when hauling timber, gravel, tools, or hunting gear across uneven terrain.

Product Specifications

Vehicle Compatibility

This suspension lift kit is engineered with dedicated fitment dimensions for utility side-by-side platforms produced between 2021 and 2025. It guarantees precise tolerance interfaces on the following makes and specific models:

CFMOTO Fitment Applications

• CFMOTO UForce 600 Base: 2021, 2022, 2023, 2024, 2025

• CFMOTO UForce 600 EPS / Hunt Edition: 2021, 2022, 2023, 2024, 2025

Segway Fitment Applications

• Segway Fugleman UT10 E / X / Standard: 2021, 2022, 2023, 2024, 2025

• Segway Fugleman UT10 S (Sport Variant): 2024, 2025

• Segway Fugleman UT10 P (Premium Variant): 2024, 2025

Installation Guide

• Estimated Installation Time: 1 to 2 hours.

• Difficulty Level: Moderate (requires a spring compressor tool).

Tools Required

• Heavy-duty floor jack and sturdy jack stands

• Metric socket and wrench set (14mm, 15mm, 17mm)

• Professional-grade mechanical strut/coil spring compressor

• Safety glasses and mechanics gloves

Helpful Installation Tips

1. Secure the Vehicle Safely: Park on flat concrete, raise the machine with a floor jack under the chassis frame, and lower it onto heavy-duty jack stands. Ensure tires are completely off the floor before removing any suspension components.

2. Compress Shocks Evenly: Use a quality spring compressor to safely compress the coil spring until tension is fully relieved from the factory retaining collar.

3. Orient the Slit Correctly: Slide the CNC-milled aluminum spacer onto the shock body utilizing its built-in slit design. Ensure it rests completely flat and flush against the spring seat before slowly releasing compressor tension.

4. Check Steering and Drive Line Clearance: Once fully installed on all four corners and lowered back to the floor, turn your handlebars or steering wheel fully from lock to lock. Verify that brake lines, ATV Steering Parts, and CV boots have ample clearance throughout their full articulation range.

Signs This Part Needs Replacement

While solid billet aluminum spacers are virtually indestructible, auxiliary suspension components, structural hardware, or underlying factory assemblies can show wear over time:

• Metal-on-Metal Clunking Noises: Usually indicates that the factory shock bushings are worn out or a mounting bolt has loosened, allowing the assembly to shift under load.

• Uneven Ride Height or Vehicle Leaning: Typically a symptom of a fatigued or broken factory coil spring, rather than an issue with the aluminum spacer itself.

• Torn CV Axle Boots or Clicks: Aggressive riding combined with maximum suspension extensions can put stress on factory CV joints. Check your ATV Drive Train Parts regularly for grease leakage or clicking sounds during tight turns.

• Scuffed or Gouged Spacer Faces: Indicates that severe debris intrusion, such as gravel or heavy trail stones, has entered the shock pocket and rubbed against the aluminum spacer.

Frequently Asked Questions

• Q: Do I need to cut or drill my frame to install this kit?

  • A: No. This is a direct-fit spring spacer kit that integrates directly into your existing factory shock and coil assembly with no structural cutting or permanent vehicle modification required.

• Q: Will this 2-inch lift kit cause my CV axles to break easily?

  • A: No. A 2-inch lift is carefully engineered to remain within the safe operating angles of stock CFMOTO and Segway CV axles, maintaining drive train reliability.

• Q: Can I install this lift kit using basic hand tools at home?

  • A: Yes, basic hand tools will remove the shock assemblies, but you will definitely need a mechanical coil spring compressor to safely compress the stock springs and slide the spacers in place.

• Q: What is the benefit of 6061 aluminum over plastic or polyurethane spacers?

  • A: High-strength 6061 billet aluminum will not compress, warp, crack, or degrade over time when subjected to extreme freezing temperatures, UV exposure, mud, or heavy payload pressure.

• Q: Does this kit lift both the front and the rear of the machine?

  • A: Yes, this complete suspension kit includes all four spacers necessary to lift both the front and rear axles for a perfectly level 2-inch lift.

• Q: What is the maximum tire size I can run with this lift on a UForce 600?

  • A: This kit clears the path to install up to 28-inch tires comfortably without experiencing aggressive rubbing against the inner fender walls under full suspension compression.

• Q: Will it drastically change how my machine rides or handles on hard pack trails?

  • A: The kit slightly increases spring preload which can reduce body roll during cornering, but it preserves your factory steering radius and smooth handling attributes.

• Q: Does this kit fit the larger UForce 1000 models?

  • A: No. This specific kit is dimensioned exclusively to fit the shock configurations of the UForce 600 and Segway Fugleman UT10 lines.

Why Buy From ATVPartsOnline.co

When it comes to outfitting your side-by-side with high-stress suspension components, sourcing from a reliable vendor is vital. At ATVPartsOnline.co, we focus strictly on delivering premium-quality replacement parts and rugged aftermarket upgrades engineered to perform.

Every single transaction processed through our store utilizes fully secure, encrypted checkout paths to protect your data. We offer highly competitive pricing across our entire curated inventory, paired with fast order processing to minimize your vehicle’s down time. Backed by solid customer support and efficient nationwide shipping across the USA alongside global international shipping availability, we ensure your components arrive safely and ready for installation.